Search results: 275000 matches
Power Factor Corrected Modules | Pico
Pico Electronics’ Power Factor Corrected Series offers a variety of choices from AC-DC power factor corrected modules with universal input voltages and 47-440 Hz operating frequency, power to 2000 Watts to isolated DC outputs from 5-300 VDC output with output power to 300 Watts.
Power Factor Correction IC | PFC Controller | Overview ...
Power factor correction (PFC) controllers with the highest efficiency and lowest THD for your high-voltage applications. Our PFC controllers offers the highest efficiency, lowest standby power, and superior power factor and current distortion for your switched-mode power supplies (SMPS), which helps you meet challenging standards like the DoE ...
Power Factor Corrector (PFC) MODULE TD-PFC-500 Technical Speci˜cation Preliminary and subject to change without notice ©2017 TELCODIUM INC. 100 to 500W Power Module PRODUCT OVERVIEW The Telcodium PFC module uses high ef˜ciency interleaved technology with a fast switching mosfet
3-Phase Power Factor Correction (PFC) Reference Design ...
Vienna 3-Phase Power Factor Correction (PFC) Reference Design. The MSCSICPFC/REF5 is a 3-phase Vienna PFC reference design for Hybrid Electric Vehicle/Electric Vehicle (HEV/EV) charger and high-power switch mode power supply applications. This reference design achieves 98.6% efficiency at 30 kW output power. PLECS Model Available
Reference Designs | DigiKey Electronics
The UCC28019 evaluation module (EVM) is a 350-W off-line Power Factor Correction (PFC) boost converter providing a 390-V regulated output at 0.9 A of load current. The PFC converter accommodates an input voltage range of 85 VAC to 265 VAC and uses average current mode control at a fixed frequency of 65 kHz.
Power Factor Correction IC | PFC Controller | Products ...
Isolated DC/DC converters & modules (75) Load share controllers (6) Offline converters (4) Power factor correction (PFC) controllers (74) PWM controllers & resonant controllers (389) Synchronous rectifier (SR) controllers (7) Power over Ethernet (PoE) ICs (30) Power sourcing equipment (7) Powered devices (23) Power switches (260)
[Resolved] 2kW PFC design from two 1000W PFC modules using ...
The PFC module will become the fundamental building block for all sorts of applications. The intention is to build power supplies of 2000W, 3000W or more using a number of PFC modules where the outputs of the modules would be connected together (outputs in parallel).
PFC device for 400W and 700W output - Power management ...
We are going to design two kinds of ACDC power modules---- approximately 400W or 700W output. I found the cheapest PFC device is UCC28051 which is Transition mode. Can it satisfy 400W or 700W use ? Any problem with Inductor Ipeak ? If it cannot be used, could you please recommend a cheap PFC device for 400W or 700W use? Thanks . Charlie
Using the UCC28180EVM-573 (Rev. B) -
360-W Power Factor Correction Module 1 Introduction The UCC28180EVM-573 evaluation module (EVM) is a 360-W off-line power factor correction (PFC) boost converter providing a nominal output voltage of 390-V regulated output at 0.923 A of load current. The PFC converter accommodates an input voltage range of 85 VAC to 265 VAC and uses average current
PFC boost converter design guide - Infineon Technologies
PFC boost converter design guide Application Note 2 Revision1.1, 2016-02-22 Design Note DN 2013-01 V1.0 January 2013 1 Introduction Power Factor Correction (PFC) shapes the input current of the power supply to be in synchronization with the mains voltage, in order to maximize the real power drawn from the mains. In a perfect PFC circuit, the